BELOW IS A LISTING OF WHAT LIBERTY PUMPS WE KEEP IN STOCK. THIS IS NOT A COMPLETE LISTING OF PRODUCTS AVAILABLE FROM LIBERTY. FOR A COMPREHENSIVE LISTING OF PRODUCTS AVAILABLE FROM LIBERTY CHECK OUT THEIR WEB SITE BY CLICKING HERE.

Pedestal Sump Pumps


Model 101
1/3 hp Cast Iron Pedestal Sump Pump

1/3 hp.
1 1/4" Discharge

Liberty's most popular pedestal pump features a 1/3 hp motor, heavy-duty dual-contact switch, high-strength cast iron impeller, cast iron base and corrosion-resistant stainless steel shaft.  All cast iron parts are epoxy powder coated for a long lasting, durable finish.  Zinc coated steel column.

Submersible Sump Pumps


250-Series
1/3 hp Cast Iron Submersible Sump/Effluent Pump

1/3 hp.
1 1/2" Discharge
1/2" Solids Handling

Rugged and dependable heavy-duty cast iron pump with powder coat finish.

Liberty's "workhorse" sump pump features a unique one-piece cast iron body, quick-disconnect power cord and three different switch options - including our Vertical Magnetic Float design (VMF) for smaller pits (model 257).

With a durable, epoxy powder coat finish and vortex style impeller, Liberty's 250-series pump is the perfect choice for low-head effluent pumping or basement de-watering.

Submersible Sump Pumps


HT40-Series
4/10 hp High Temp Submersible Pump

4/10 hp.
1 1/2" Discharge
3/4" Solids Handling

Handling fluid temperatures of up to 200 degrees F., Liberty's HT40-series submersible pump is designed for hot water applications such as boiler blow-down pits, condensate pits and high temperature water transfer. Other features include all cast iron housings, epoxy powder coat finish and a high temperature float.

 

Back Up Sump Pumps


SJ10 SumpJet®
Water Powered Back-Up Pump

1 1/2" Discharge

3/4" NPT Water Inlet Connection Accepts 20PSI up to 100PSI inlet supply pressure*

The SumpJet® (Model SJ10) is a water powered back-up sump pump that will protect your basement in the case of a power outage. This unique product is powered by your municipal water supply** and requires no electricity to operate! With a compact high efficiency design, The SumpJet® removes 2 gallons of sump water per 1 gallon used.  The SumpJet® is fully automatic, arrives completely assembled, and comes backed with Liberty's standard 3 year warranty.

*The SJ10 pumping performance varies with inlet water source pressure and pumping head.  See complete specifications and performance chart for expected flow rates. 

**The SJ10 requires an uninterrupted water source to operate.  If you have a well pump, the SJ10 will not operate during power outages.

Drain Pumps


Model 404
1/3 hp Compact/Low Profile Drain Pump

1/3 hp.
1 1/2" Discharge
3/8" Solids Handling

The short profile of Liberty's 404 is specially designed for compact areas and gives you the freedom to install fixtures where gravity drain lines are not available.  Our QuickTree® Technology provides a separate access cover for easy switch inspection. For gray wastewater applications, the 404 is perfect for laundry tray sinks, bar sinks, washing machines and other basement remodeling projects.  The system arrives fully assembled and ready to install.

Drain Pumps


Model 405
1/2 hp Commercial Drain Pump

1/2 hp.
2" Discharge
3/8" Solids Handling

Liberty's 405 is a specially designed commercial drain pump built to perform in high-head, high temperature situations. Our QuickTree® Technology provides a separate access cover for easy switch inspection. For gray wastewater applications, the 405 is perfect for laundry trays, multi-compartment sinks, bar sinks, utility sinks, dishwashers and allows you the freedom to install fixtures where gravity drain lines are not available. The system arrives fully assembled and ready to install.

Condensate Pumps


LCU-20S
Condensate Pump with Safety Switch

115 or 230 Volt available
Compact tank designs

The LCU-Series Condensate Pumps from Liberty are designed to handle removal of condensate from high efficiency furnaces, A/C equipment, dehumidifiers, ice machines and other applications producing condensate. Model LCU-20S and LCU220S come with a safety switch. All Liberty condensate pumps come with a three year warranty.

LCU-Series Features
  • High impact ABS tank
  • Wall mounts
  • Three intake holes
  • 3/8" O.D. Outlet
  • Barbed and threaded discharge connection
  • Removeable Check valve
  • Stainless steel shaft
  • 6' power cord with ground
  • Thermally protected
  • Fully automatic
  • Quiet operation
  • Built in safety switch (LCU-20S, LCU-20ST and LCU220S only)

Maximum fluid temperature for LCU models: 150 degrees Fahrenheit

Models ending with a "T" suffix include 20' of clear 3/8" tubing

Utility Pumps


Model 260
1/6 hp Submersible Utility Pump

1/6 hp.
3/4" Discharge

Lightweight, portable and weighing only 7.5 lbs., the model 260 is perfect for miscellaneous water removal from pool covers, flooded areas or other clear water transfer applications such as fountains, etc.  Completely submersible and powered by a 1/6 hp motor, the 260 pumps down to as low as 1/8".  Garden hose connection.  Capabilities to 23 GPM, maximum head 25'.

Mid Range Head


280-Series
1/2 hp Submersible Effluent/Sump Pump

1/2 hp.
1 1/2" Discharge
3/4" Solids Handling

With a shut-off head of 37 feet and 3/4" solids-handling capability, the 280-series by Liberty covers a wide-range of low-head to mid-range pump applications.  Designed for STEP systems, mound systems, liquid waste transfer and high output sump applications, you can count on the 280-series to offer superior performance.  Designed with Liberty's unique one-piece cast iron body and quick-disconnect cords available in 10' and 25' lengths.  High-output 1/2 hp submersible with rugged cast iron housing.

Mid Range Head


290-Series
3/4 hp Submersible Effluent/Sump Pump

3/4 hp.
1 1/2" Discharge
3/4" Solids Handling

Features:
  • Quick-disconnect 10' standard power cord allows replacement of cord in seconds without breaking seals to motor (other lengths available)
  • Permanently lubricated upper and lower bearings
  • Oil-filled, hermetically sealed motors with thermal overload protection
  • Stainless steel, removable bottom screen
  • Stainless steel rotor shaft
  • Stainless steel fasteners

Simplex Packages


Pro370-Series
21" x 30" Simplex Sewage System

2" or 3" Discharge

The Pro370-Series is the most advanced residential sewage package available.  Liberty's flagship product, the Pro370-Series sewage package, arrives from the factory pre-assembled with QuickTree® Technology saving valuable labor time at the job site. Now available "alarm-ready" with pre-mounted alarm floats. Give the 370 a try and see why more contractors are demanding Liberty.
US Patent No. 7,520,736

Features:
  • Fully Assembled and shipped with a clear disposable construction cover that will protect the system during rough-in and masonry work.
  • Available with any of Liberty's 2" solids-handling sewage pumps
  • Unique QuickTree® Technology system allows easy access and removal of switches without disturbing pump or plumbing. 
  • NEW!  Inspection/Access Cover
  • NEW!  Integral rubber seals permanently attached to cover
  • NEW!  Unique cord seal technology
  • Larger Basin- 40% more capacity than standard 18" X 30" basins.  Results in decreasing switch cycles and improving pump life.
  • Integrally molded torque stops secure the pump in its proper position
  • Integrally molded anti-flotation collar
  • Integrally molded handles to ease transportation and installation
  • Includes Liberty's standard three-year limited warranty.

Simplex Packages


Pro380-Series
24" x 24" Simplex Sewage System

2" or 3" Discharge

The Pro380-Series is a large capacity shallow system design featuring a 24" x 24" basin - perfect for bedrock and difficult soil conditions.  The Pro380-Series offers a large 41 gallon capacity and longer pump cycles for extended pump life.  The Pro380-Series sewage package arrives from the factory pre-assembled with QuickTree® Technology saving valuable labor time at the job site. Now available "alarm-ready" with pre-mounted alarm floats. Give the Pro380 a try and see why more contractors are demanding Liberty.  Patent Pending.

Features
New QuickTree® technology available on the Pro-Series allows easy inspection and replacement of the pump and/or alarm float without disconnecting plumbing or removing the pump itself. Floats are mounted on a stainless steel rod (tree) and suspended in the system by means of a holder built into the main cover. Access to the QuickTree® is easily accomplished by a secondary "access" cover. To protect the system during rough-in and masonry work, the new Pro-Series are shipped with a clear disposable construction cover. This recyclable cover is simply snapped in place and can be easily removed when the system is ready for finish plumbing. The new Pro-Series is backed by Liberty's standard three-year warranty.

Sewage Pumps


LE40-Series
4/10 hp Submersible Sewage Pumps

4/10 hp.
2" Discharge
2" Solids Handling

Heavy-duty built and reliable, Liberty's LE40-series is the perfect choice for residential sewage applications. Featuring all cast iron construction with an epoxy powder coat finish, stainless steel fasteners, quick-disconnect power cord and a vortex style impeller for superior solids handling, the LE40-series combines solid performance with exceptional value.

Sewage Pumps


LE50-Series
1/2 hp Submersible Sewage Pumps

1/2 hp.
2" Discharge
2" Solids Handling

Sporting a new tough powder coat finish over heavy cast iron housings, Liberty's LE50-series is a commercial-grade workhorse for residential and light commercial sewage applications.  Its efficient 1/2 hp motor with permanently lubricated bearings, stainless steel fasteners and quick-disconnect power cord design make this a favorite choice among plumbing professionals.  Other features include piggyback style switches on automatic models, 2" solids-handling ability and a shut-off head of 25 feet.

Sewage Pumps


LE70-Series
3/4 hp Submersible Sewage Pumps

3/4 hp.
2" or 3" Discharge
2" Solids Handling

Liberty's LE70-series is a 3/4 hp sewage pump with 2" solids-handling capability.  Constructed of heavy cast iron with a tough epoxy powder coat finish, stainless steel fasteners and rotor shaft, the LE70 is designed for durability.  Its quick-disconnect cord design allows for easy interchange of power cords in 10'and 25' lengths.  Available in 2" or 3" discharge configurations and a wide range of voltages.

Macerating Toilet Systems


Ascent II
Macerating Toilet System

The new Ascent II macerating toilet system features the Industry’s only 1.28 GPF high efficiency toilet for a macerating system.  Now, put a bathroom anywhere! Perfect for bathroom additions and remodeling without breaking concrete floors, the Ascent II can pump up to 25’ vertically and 150 horizontally through a 1" discharge pipe.

The new system features advanced RazorCutTM technology for improved maceration of waste and a removable service panel that provides quick access to the cutter area without disconnecting the plumbing. Other features include ISTTM solid state switching, a built-in alarm and LED lights with external touchpad for alarm silence and manual override. The high quality toilets – available in round front and elongated, have improved flush performance and carry the WaterSense® mark. Both models feature insulated tanks to eliminate sweating. Toilet seat included.
ABOVE IS A LISTING OF WHAT LIBERTY PUMPS WE KEEP IN STOCK. THIS IS NOT A COMPLETE LISTING OF PRODUCTS AVAILABLE FROM LIBERTY. FOR A COMPREHENSIVE LISTING OF PRODUCTS AVAILABLE FROM LIBERTY CHECK OUT THEIR WEB SITE BY CLICKING HERE.

Translate This Page

 3137 BAILEY AVE., BRONX, NEW YORK |