RANGER SUPPLY CO. INC.

WE DO NOT STOCK ALL OF THE ITEMS SHOWN HERE. THEY ARE AVAILABLE AND WE CAN GET THEM BUT WE DO NOT KEEP EVERY ITEM IN STOCK.

Interceptors


		MI-G Series - 4 to 50 US G.P.M PDI Sized Grease Interceptor Click for specsheet List Prices (2012) List Prices (2011) MIFAB Series MI-G Series sanitary powder epoxy coated inside and outside fabricated 10 gauge steel grease interceptor with flow ratings of 4-50 GPM and grease holding capacity of 8-100 lbs. Unit shall include: removable baffle assembly and cross bar, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), external vented flow control fitting, internal air relief by ...




		MI-G-DOS Electronic Enzyme Dosing Pump Click for specsheet List Prices Specification: MIFAB Series MI-G-DOS bacterial enzyme dispensing system is a self contained 120 or 220 VAC fully automatic dosing pump that is specifically system matched to MIFAB Series grease interceptors.Function: The MI-G-DOS system delivers a programmable pre-determined amount of bacterial enzyme liquid to MIFAB grease interceptors which effectively reduce fats, oils and greases (F.O.G.) into water and carbon ...




		MI-G-L Low Rough-In Series 4 to 50 US G.P.M. PDI Sized Grease Interceptors Click for specsheet List Prices (2012) List Prices (2011) MIFAB Series MI-G-L 20-50 sanitary powder epoxy coated inside and outside fabricated 10 gauge steel grease interceptor with flow rating of 20-50 GPM and grease holding capacity of 40-100 lbs. Unit shall include: removable baffle assembly and cross bar, securing bolt(s), external vented flow control fitting, internal air relief bypass, and steel powder epoxy coated ...




		XL-MI-G Series 75 to 750 G.P.M. Large Capacity Grease Interceptors Click for specsheet List Prices (2012) List Prices (2011) MIFAB Series XL-MI-G 0-11 sanitary epoxy coated inside and outside fabricated 10 gauge steel grease interceptor with flow rating of 75-750 lbs. and grease holding capacity of 150-1500 lbs. Unit shall include: removable baffle assembly and cross bar, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), stainless steel calibrated orifice plate, internal air ...




		MI-G-SD Series - 7 to 75 G.P.M. Grease Interceptor Click for specsheet List Prices (2012) List Prices (2011) MIFAB Series MI-G-SD 1-8 sanitary powder epoxy coated inside and outside fabricated 10 gauge steel grease interceptor with flow rating of 7-75 gpm and grease holding capacity of 14-150 lbs. Unit shall include: removable baffle assembly and cross bar, deep seal trap covered by lid, securing bolt(s), external vented flow control fitting, internal air relief bypass, ...




		MI-G-SDH Series - Semi Automatic 7 to 75 G.P.M. Grease Interceptor (With Draw-off Hose) Click for specsheet List Prices (2012) List Prices (2011) MIFAB Series MI-G-SDH 1-7 sanitary powder epoxy coated inside and outside fabricated 10 gauge steel grease interceptor with flow rating of 7-50 gpm and grease holding capacity of 14-100 lbs. Unit shall include: removable baffle assembly and cross bar, internal deep seal trap covered by lid, securing bolt(s), external vented flow control fitting, internal air relief by ...




		MI-G-L-SDH Series Low Rough In Grease Interceptors with Draw Off Hose Click for specsheet List Prices (2012) List Prices (2011) MIFAB Series MI-G-L-SDH 20-50 sanitary powder epoxy coated inside and outside fabricated 10 gauge steel grease interceptor with flow rating of 20- 50 gpm and grease holding capacity of 40-100 lbs. Unit shall include: removable baffle assembly and cross bar, deep seal trap covered by lid, securing bolt(s), external vented flow control fitting, internal air ...




		MI-CS Series - Cover Shrouds for 4 to 100 US G.P.M PDI Grease Interceptors Click for specsheet List Prices (2012) List Prices (2011) The shroud provides support for the interceptor and adjustability of the inlet and outlet dimensions to match drainage piping where necessary. The shroud can be set in the slab at the time of pouring. The shroud is secured and suspended in the slab by its anchoring flanges. The interceptor is easily accessible for cleaning and inspection simply by removing the cover that sits flush ...




		MI-CSD Series - For MI-G-SD(H) Series Draw-off Grease Interceptors Click for specsheet List Prices (2012) List Prices (2011) MIFAB Series MI-CSD 7-75 sanitary powder epoxy coated inside and outside fabricated 10 gauge steel cover shroud. Unit to include: angle support brackets on outside to anchor shroud into underground and inside to support the MIFAB Series MI-G-SD(H) grease interceptor furnished (specify MI-G-SD or MI-G-SDH grease interceptor required), removable steel powder epoxy coated, non ...




		MI-G-AD Series - Automatic Recovery Grease Interceptor Click for specsheet List Prices (2012) List Prices (2011) MIFAB Series MI-G-AD 4-7 with flow rate of 20-50 gpm and grease holding capacity of 40-100 lbs. automatic recovery grease interceptor with removable internal basket strainer. Construction to be 16 gauge type 304 stainless steel heli-arc welded and polished to a #4 finish. Lid fastened down with stainless steel latches and catches welded in place. Built to NSF Standard #2 ...




		MI-E-G Series - 4 to 50 US G.P.M. Electronic Grease Interceptor Click for specsheet List Prices (2012) List Prices (2011) MIFAB Series MI-E-G electronic grease interceptor with powder epoxy coated interior and exterior, and 10 gauge fabricated steel solids interceptor with integral perforated sediment bucket removable through the bottom. Interceptor complete with 2" F.I.P. low inlet and 2" F.I.P. high outlet on other side for flow through installation and gasketed bottom lid secured with ...




		MI-G-BO Series Bolt On (Fixed) Extensions for MI-G Series Grease Interceptors (8) List Prices (2012) List Prices (2011)




		XL-MI-G-BO Series Bolt On (Fixed) Extension for XL-MI-G Series Grease Interceptors (12) List Prices (2012) List Prices (2011)




		MI-G-RL Series - Replacement Lids for Ml-G Series Grease Interceptors List Prices (2012) List Prices (2011)




		MCL-G Series Grease Interceptors Click for specsheet List Prices Regularly manufactured with an electrostatically applied baked powder coating and supplied with an external, vented, flow control fitting. Modifications are not available to dimensions of product. Choose MIFAB's Ml-G Grease Interceptor Series when integral extensions, anchor flanges, and other optional variations are required. MIFAB Series MCL-G 0-7 sanitary powder epoxy coated inside and outside fabricated 14 gauge steel grease interceptor with flow rating of 4-100 ...




		MCL-G-L Series Grease Interceptors Click for specsheet List Prices Specification: MIFAB Series MCL-G-L sanitary powder epoxy coated inside and outside fabricated 14 guage steel grease interceptor with flow rating of (indicate) and grease holding capacity of (indicate). Unit shall include: removable baffle assembly and crossbar, securing bolt(s), external vented flow control fitting, internal air releif bypass, feet underneath interceptor to elevate it 1/2" off the ground, and steel powder epoxy coated rectangular gasketed ...




		MI-G-P - Moulded Plastic (HDPE) Grease Interceptors with Steel Traffic Lid Click for specsheet List Prices MIFAB Series MI-G-P sanitary, high density polyethylene (HDPE) grease interceptor with flow rating of 10-50 gpm and grease holding capacity of 20-100 lbs. HDPE material to be 1/4" (6) thick. Interceptor shall include: removable baffle assembly and cross bar, securing bolt(s), oversized neoprene gasket, external vented flow control fitting, internal air relief by pass and deep seal trap covered by the steel, powder epoxy coated, non skid lid(s), suitable for in or above ground ...




		MI-ROC Series - Grease Interceptors with 3 Way Outlet and Recessable Lid Click for specsheet List Prices Specification: MIFAB series MI-ROC sanitary acid resistant powder epoxy coated inside and outside. Fabricated 10 gauge steel grease interceptor with flow rating of _____ and grease holding capacity of _____ . Unit shall include: I.P.S. inlet and outlet, cast iron drainage fittings to form a visible double wall deep seal trap, easily removable separator and filter screens, recessed, non skid rectangular gasketed lid for in or above ground use, removable cross bar, securing bolt(s). ...




		MI-ROC-LO Series - Low Rough-in Grease Interceptors with Recessable Lid List Prices




		MI-GO Series - Residential Grease Interceptors with Wrap Around Lid List Prices




		MCL-G-BO Series Grease Interceptors Click for specsheet List Prices Regularly manufactured with an electrostatically applied baked powder coating and supplied with an external, vented, flow control fitting. Modifications are not available to dimensions of product. Choose MIFAB's MI-G-BO Grease Interceptor Series when integral extensions, anchor flanges, and other optional variations are required. MIFAB Series MCL-G-BO 0-7 sanitary powder epoxy coated inside and outside fabricated 14 gauge steel grease interceptor with flow rating of ...




		MI-O Series 10 to 500 US G.P.M. Oil Interceptor Click for specsheet List Prices (2012) List Prices (2011) MIFAB Series MI-O sanitary powder epoxy coated inside and outside fabricated 10 gauge steel oil interceptor. Unit to include: sediment bucket with perforated baffle near inlet, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), removable baffle assembly and cross bar, stainless steel calibrated orifice plate, internal air relief by-pass, adjustable automatic ...




		MI-E-O Series - 10 to 500 US G.P.M. Electronic Oil Interceptors Click for specsheet List Prices (2012) List Prices (2011) MIFAB's electronic oil interceptor monitors the oil level within the interceptor. A control panel built into a standard electrical box consists of a multi-level LED display that alerts the operator to the current oil level. A green light on the control panel indicates normal operating conditions. At 50% oil storage capacity, the green light will change to yellow. At 75% oil ...




		MI-O-HU Series 10 to 500 US G.P.M. Oil Interceptor with Integral Oil Storage Tank Click for specsheet List Prices (2012) List Prices (2011) MIFAB Series MI-O-HU sanitary powder epoxy coated inside and outside fabricated 10 gauge Steel oil interceptor. Unit to include: sediment bucket with perforated baffle near inlet, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), removable baffle assembly and cross bar, stainless Steel calibrated orifice plate, internal air relief by-pass, ...




		MI-E-O-HU Series - 10 to 500 US G.P.M. Electronic Oil Interceptors with Integral Oil Storage Tank Click for specsheet List Prices (2012) List Prices (2011) MIFAB's electronic oil interceptor monitors the oil level within the interceptor. A control panel built into a standard electrical box consists of a multi-level LED display that alerts the operator to the current oil level. A green light on the control panel indicates normal operating conditions. At 50% oil storage capacity, the green light will change to yellow. At 75% ...




		MI-O-BO Series Bolt On (Fixed) Extensions for MI-O(-HU) Series Oil Interceptors (34) List Prices (2012) List Prices (2011)




		MI-OS Series - Oil/Sediment Interceptor Click for specsheet List Prices (2012) List Prices (2011) MIFAB Series MI-OS 1-4 sanitary powder epoxy coated inside and outside fabricated 10 gauge Steel oil/sediment interceptor with sludge capacity of 12-200 lbs. Interceptor complete with ANSI rated "Special Duty" ductile iron grate(s) with load rating over 10.000 lbs., removable sediment bucket and mud pan, deep seal trap with integral sewer gas stopper, internal vent system, cleanout ...




		MI-FISH Series - Fish Scale Interceptor Click for specsheet List Prices (2012) List Prices (2011) MIFAB Series MI-FISH-1-12 sanitary powder epoxy coated inside and outside fabricated 10 gauge steel fish scale interceptor. Unit shall include: Sediment bucket with perforated baffle near inlet (3/8" (10) holes), primary removable straining baffle (1/2" (13) thick with 1/4" (6) holes), secondary removable straining baffle (1/2" (13) thick with 1/8" (3) holes), securing ...




		MI-HAIR Series Lavatory Mounted Hair and Sediment Interceptor Click for specsheet List Prices (2012) List Prices (2011) MIFAB Series MI-HAIR lacquered cast iron hair and solids interceptor with internal stainless Steel perforated sediment bucket removable from bottom. Interceptor complete with 1-1/2" slip joint elbow inlet, 1-1/2" F.I.P. side outlet, and gasketed cleanout plug.




		MI-HEL Series Heliport Fuel Spill Interceptors Click for specsheet List Prices (2012) List Prices (2011) MIFAB Series MI-HEL helicopter port fuel interceptor constructed from high strength 1/4" (6) plate steel, ASTM-A242, outlet vent connection, internal vent connection, gasketed access covers fastened with stainless steel bolts, 2" (51) fuel drain connection, 1" (25) fresh water supply connection with gate valve, back flow preventer, automatic water level float valve, external sight ...




		MI-LINT Series - Lint Interceptor Click for specsheet List Prices (2012) List Prices (2011) MIFAB Series MI-LINT sanitary powder epoxy coated inside and outside fabricated 10 gauge steel lint interceptor with flow rate of 34-1536 gpm. Unit shall include: 1/2" (13) thick fixed primary straining baffle with 3/8" (10) holes and secondary 1/2" (13) thick removable straining baffle with 3/8" (10) holes, removable cross bar, securing bolt(s), stainless steel calibrated ...




		MI-RICE Series - Rice Interceptor Click for specsheet List Prices MIFAB Series MI-RICE sanitary powder epoxy coated inside and outside fabricated 10 gauge steel rice interceptor with flow rate of 34-1536 gpm. Unit shall include: 1/2" (13) thick fixed primary straining baffle with 3/8" (10) holes and secondary 1/2" (13) thick removable straining baffle with 3/8" (10) holes, removable cross bar, securing bolt(s), stainless steel calibrated orifice plate, and steel powder epoxy coated non skid rectangular gasketed lid(s).




		MI-SAND Series - Sand and Grit Interceptors Click for specsheet List Prices (2012) List Prices (2011) MIFAB Series MI-SAND 1-7 sanitary powder epoxy coated inside and outside fabricated 10 gauge steel sand interceptor. Unit shall include: removable cross bar, four 3" (76) threaded vent connections, solid straining baffles, stainless steel calibrated orifice plate, securing bolt(s), sediment bucket with perforated baffle beside inlet, deep seal trap, sewer gas stopper, internal ...




		MI-SAND/OIL Series - Sand and Oil Interceptor Click for specsheet List Prices (2012) List Prices (2011) MIFAB Series MI-SAND sanitary powder epoxy coated inside and outside fabricated 10 gauge steel sand interceptor. Unit shall include: removable cross bar, four 3" (76) threaded vent connections, solid straining baffles, stainless steel calibrated orifice plate, securing bolt(s), sediment bucket with perforated baffle beside inlet, deep seal trap, sewer gas stopper, internal air relief ...




		MI-SD Series - Sediment Drain Interceptor Click for specsheet List Prices (2012) List Prices (2011) MIFAB Series MI-SD 1-10 sanitary powder epoxy coated inside and outside fabricated 10 gauge steel sediment/drain interceptor. Unit shall include: visible deep seal trap, sewer gas stopper, internal air relief by-pass, 14 gauge slotted powder epoxy coated inlet grate, with slot size of 3/8" x 3" (10 x 76), and a removable sediment and mud pan.




		MI-SOLID-L Series - Large Sediment and Solids Interceptor Click for specsheet List Prices (2012) List Prices (2011) Specification: MIFAB® Series MI-SOLID-L large capacity powder epoxy coated interior and exterior 10 gauge fabricated steel solids interceptor with internal perforated sediment bucket and baffle assembly. Interceptor complete with 3” F.I.P. low inlet and 3” F.I.P. high outlet on other side for flow through ...




		MI-SOLID-LB Series - Solids Interceptor with Bottom Access Click for specsheet List Prices (2012) List Prices (2011) Specification: MIFAB® Series MI-SOLID-LB small capacity powder epoxy coated inferior and exterior 10 gauge fabricated steel solids interceptor with internal perforated sediment bucket removable through the bottom. Interceptor complete with 2" F.I.P. low inlet and 2" F.I.P. high outlet on other sie for flow through installation and gasketed ...




		MI-SOLID-M Series - Medium Sediment and Solids Interceptor Click for specsheet List Prices (2012) List Prices (2011) Specification: MIFAB® Series MI-SOLID-M medium capacity powder epoxy coated interior and exterior 10 gauge fabricated steel solids interceptor with internal perforated sediment bucket and baffle assembly. Interceptor complete with 2” F.I.P. low inlet and 2” F.I.P. high outlet on other side for flow through ...




		MI-SOLID-S Series - Suspended Sediment and Solids Interceptor Click for specsheet List Prices (2012) List Prices (2011) Specification: MIFAB® Series MI-SOLID-S lacquered cast iron solids interceptor with internal stainless steel perforated sediment bucket removable through top. Interceptor complete with 2” F.I.P. inlet and outlet and gasketed lid secured with single handle. Function: Used in dental offices, jewellery stores and other areas ...




		MI-SOLID-SA Series - Side Access Solids Interceptor Click for specsheet List Prices (2012) List Prices (2011) MIFAB Series MI-SOLID-SA side access Type 304 14 gauge stainless Steel solids interceptor with internal stainless Steel perforated sediment bucket connected to a removable and gasketed side access latched lid. Interceptor complete with 2" female threaded inlet, 2" female threaded outlet on each side for right or left hand installation, and internal stainless steel ...




		MI-SOLID-TA Series - Top Access Solids Interceptor Click for specsheet List Prices (2012) List Prices (2011) MIFAB Series MI-SOLID-TA top access powder epoxy coated 10 gauge fabricated steel solids interceptor with internal perforated sediment bucket and gasketed top access latched lid. Interceptor complete with no hub inlet on one side and no hub outlet on other side for flow through installation.

WE DO NOT STOCK ALL OF THE ITEMS SHOWN HERE. THEY ARE AVAILABLE AND WE CAN GET THEM BUT WE DO NOT KEEP EVERY ITEM IN STOCK.

Translate This Page

3137 BAILEY AVE., BRONX, NEW YORK |