*MILLinches
STEAM Rating 780 BTU/HR/FT (3.25 SQ FT EDR)
Maximum Allowable working Pressure -30 PSI,
Water:15 PSI, Steam.
NOte:
The Pressure Drop MUst be SEPARATELY Calculated FOR each Individual Assembly
Water Content 0.3 Gallons Per Linear Foot.
Cast Board
Weight/LB.
Per FT. APPROX.
PRICE
Cast Iron Base BOard PER LINEAR FT.
17
$41.46
Accessories
Part #
Valve Enclosures (Inter, Right or Left)
BVE
19.48 ea
Dummy Covers (4 or 6 Ft.) per foot
BDC4
12.54
4" End Cap ( RIGHT)
BECR4
7.78
ea
4" End Cap (Left)
BECl4
7.78 ea
6" End Cap ( RIGHT)
BECR6
11.68 ea
6" End Cap (Left)
BECL6
11.68 ea
Inside Corner
BIC
20.78 ea
6" Flexible Connector
FLEX6
29.9 ea
9" Flexible Connector
FLEX9
37.7 ea
3/4" Push Nipples
BPN34
1.28 ea
3/4" Vent Plugs
BVP34
1.02 ea
Tie Bolts with Nuts
BTB
.84 ea
Top or Bottom Support
BTS
.71 ea
CastSlope Assembly Tool
Bat
201.5 ea
Assembly and Selection Guide
Dimensions
Assembly Information
NOTE: For additional Part numbers of other baseboard assemblies refer to master Part # List
Installation
of panels longer than 24” requires push nipples, adhesive and nuts
& bolts to be applied wherever section meet. A special assembly
tool is available. Installation of panels 6 ft. or longer requires top
or bottom support.
Note: I=B=R are determined from tests made is accordance with the I=B=R
testing and rating code for baseboard type radiation, including an
allowance of 15% for heating effect permitted by the code.
Standard flow rate of 500 lbs. (1gpm) per hour must be used.
Rating Based on active length. Active length same as total length
