CXM & C5 - Small Rubber Support Series
(2)
Specification:
Dimensions - see chart
Material
Base - 100% recycled rubber, UV resistant
Strut (on C5) - 14 gauge galvanized steel (1 5/8” wide x 7/8” tall)
Maximum Load
CXM - 150 lbs.
C5 - 300 lbs.
Function: The CXM and C5 Series provide an economic alternative. They are perfect for supporting conduit or smaller pipe....
CXP - Rubber Support Series
(2)
Specification:
Dimensions - see chart
Material
Base - 100% recycled rubber, UV resistant
Maximum Load
CXP - 500 lbs.
CXP-2 - 800 lbs.
Function:
The CXP Series supports provide an economic alternative. They are ideal
for supporting conduit or pipe. Strut and clamps by others.
C - Rubber Support Series with 7/8" Galvanized Steel Channel
(5)
Specification:
Base with 14 gauge Galvanized Channel (13/16” high)
Dimensions - 4 7/8” High x 6” Wide x 9.6” to 48” Length (See Chart)
Material - 100% recycled rubber, UV resistant
Maximum Load - 750 lbs. - for each 9.6” long support
Function: C Series channel support is designed for superior support of gas and refrigeration piping systems, cable tray, ...
C5 & C6 - Rubber Support Series with 1 5/8" Galvanized Steel Channel
(5)
Specification:
Dimensions
C510 - 5 5/8” Height x 6” Width x 9.6” Length
C610 to C640 - 6 1/8” Height x 6” Width x 9.6” to 38.5” Length
Material
Base - 100% recycled rubber, UV resistant
Channel - 14 gauge galvanized steel (1 5/8” wide x 1 5/8” high)
Maximum Load - 600 lbs. - for each 9.6” long support
Function: The ...
CXW - Widebody Rubber Support
(3)
Specification:
Dimensions - 2.50” Height x 12” Width x Length as specified in chart
Material
Base - 100% recycled rubber, UV resistant
Maximum Load - 1,000 lbs. - for each 12” long support
Function:
The CXW Series is designed for superior support of gas and
refrigeration piping systems, cable tray, electrical conduit, multiple
lines, HVAC equipment and many other ...
CW - Widebody Series with 1 5/8" x 13/16" Galvanized Channel
(6)
Specification:
Dimensions - 3.3125” Height x 12” Width x Length as specified in chart
Material
Base - 100% recycled rubber, UV resistant
Strut - 14 gauge galvanized steel
Maximum Load - 1,000 lbs. - for each 12” long support
Function: The CW Series is designed for superior support of gas and refrigeration piping systems, cable tray, ...
CGW - Widebody Gasket Series
(4)
Specification:
Dimensions
3.3125” Height x 12” Width x Length as specified in chart
Gasket - 18” Wide x Length as specified in chart
Material
Base - 100% recycled rubber, UV resistant
Strut - 14 gauge galvanized steel
Maximum Load - 1,000 lbs. - for each 12” long support
Function: The CGW Series channel support is ...
CE - Extension Series
(2)
Specification:
Dimensions
Base - 4” Height x 6” Width x 9.6” Length
Overall height as specified in chart
Material
Base - 100% recycled rubber, UV resistant
Strut - 14 gauge galvanized steel (1 5/8” wide x 7/8” tall)
Rod - Two ½” electro zinc plated all threaded rod risers
Maximum Load - 400 lbs.
...
CEW - Widebody Extension Series
(3)
Specification:
Dimensions
Base - 2 ½” Height x 12” Width x 12” Length
Overall height as specified in chart
Material
Base - 100% recycled rubber, UV resistant
Strut - 14 gauge galvanized steel (1 5/8” wide x 7/8” tall)
Rod - Two ½” electro zinc plated all threaded rod risers
Maximum Load - 800 lbs.
...
CS - 1 5/8" Steel Channel Series with 6" Adjustable 1 7/8" x 1 7/8" Square Leg
(5)
Specification:
Base with 12 gauge Galvanized Channel (1 5/8” high) and Adapter Leg
Dimensions - 5 5/8” High (not including height of adapter leg) x
6” Wide x Length (Base Length)
Material - 100% recycled rubber, UV resistant
Adapter Fitting - 1 7/8” x 1 7/8” channel with 9/16” holes on all three (3) sides.
Maximum Load - 500 lbs. - for ...
CZ - Seismic Series
(4)
Specification:
Dimensions - 4 7/8” High x 6” Wide x 9.6” to 38.5” Length (Base Length)
Materials
Base - 100% recycled rubber, UV resistant
Strut - 14 gauge Galvanized Channel
Rod - ½” electro zinc plated all threaded rod risers
Gasket - 3” x 3”
Maximum Load - 750 lbs. - for each 9.6” long support
...
CRM - Roller Series, Small Base
Specification:
Material
Base - 100% recycled rubber, UV resistant
Roller - rubber
Maximum Load - 300 lbs.
Function: The CRM Series is designed for superior
support of gas and refrigeration pipes at a higher elevation from the
roof surface. The roller allows for longitudinal movements of the pipe.
The CRM provides a less expensive alternative to the larger roller
series products. ...
CR - Roller Series, Regular Base
(2)
Specification:
Dimensions
Base - Width of 6” x Length of 9.6”
Roller Width - 3”, 4”, or 6” rollers are available (See Chart)
Total Height to Roller Centre - ranges from 5.75” to 6.5” (See Chart)
Material
Base - 100% recycled rubber, UV resistant
Roller - rubber (cast iron galvanized rollers for 6” pipe are also available)
Maximum ...
CRE - Extended Roller Series, Regular Base
(3)
Specification:
Dimensions
Base - Width of 6” x Length of 9.6”
Roller Width - 3”, 4”, or 6” rollers are available (See Chart)
Total Height to Roller Centre - ranges from 8” to 12” (See Chart)
Material
Base - 100% recycled rubber, UV resistant
Roller - rubber (cast iron galvanized rollers for 6” pipe are also available)
Extending Rods and ...
CREW - Extended Roller Series, Widebody Base
(6)
Specification:
Dimensions
Base - 12” Width x 12” Length
Roller Width - 3”, 4”, or 6” (See Chart)
Total Height to Roller Centre - 12” or 16” (See Chart)
Material
Base - 100% recycled rubber, UV resistant
Roller - rubber (cast iron galvanized rollers for 6” pipe are also available)
The extending rods, as well as the horizontal rod that ...
CB - Bridge Support Series with Two CX Series Supports and 1 5/8" Galvanized Channel
(5)
Specification:
Two (2) Bases Bridged with 12 gauge Galvanized Channel (1 5/8” high)
Dimensions - 5 5/8” High x 6” Wide x Bridge Length (Overall Length)
Material - 100% recycled rubber, UV resistant
Load Rating - Each base rated at 500 lbs. Refer to beam load of channel at various lengths as other factor (see Strut catalog)
Function: CB Bridge ...
CES - Medium Load Series
(2)
Specification:
Dimensions - 10” High x 9.6” Base Length x 12” to 24” Crossbeam Width (See Chart)
Material
Base - 100% recycled rubber, UV resistant
Crossbeam and Uprights - 1 5/8” x 1 5/8”, 12 gauge galvanized steel strut
Maximum Load - 500 lbs.
Function: The CES Series can support gas and refrigeration piping systems, ...
CESHW - Widebody Load Series
(2)
Specification:
Dimensions
Base - 12” Width x 12” Length
Material
Rubber Base - 100% recycled rubber, UV resistant
Base Strut - 14 gauge galvanized steel
Crossbeam - 1 5/8” x 3 1/4”, 12 gauge galvanized steel, back to back strut
Upright - 1 5/8” x 1 5/8”, 12 gauge galvanized steel strut
Maximum Load - 800 lbs.
...
CESW - Widebody, Medium Load Series
(3)
Specification:
Dimensions - 24” Crossbeam Width x 12” Base Length x 24” to 48” Height (See Chart)
Material
Base - 100% recycled rubber, UV resistant
Crossbeam and Uprights - 1 5/8” x 1 5/8”, 12 gauge galvanized steel strut
Maximum Load - 600 lbs.
Function: The CESW Series can support gas and refrigeration piping systems, cable ...
DSA10 - Duct Support Series
(3)
Specification:
Telescopic Crossbeam
Outer Piece Dimensions - 1 7/8” x 1 7/8”
Inner Piece Dimensions - 1 5/8” x 1 5/8”
Material - 12 gauge galvanized steel
Vari-Angle Bracket
Dimensions - 5 7/8” x 1 7/8”
Material - 1/4” Hot-rolled, zinc plated carbon steel
Base (DSA10)
Dimensions - 4” Height x 6” Width x ...
DSA12 - Widebody, Duct Support Series
(3)
Specification:
Telescopic Crossbeam
Outer Piece Dimensions - 1 7/8” x 1 7/8”
Inner Piece Dimensions - 1 5/8” x 1 5/8”
Material - 12 gauge, galvanized steel
Vari-Angle Bracket
Dimensions - 5 7/8” x 1 7/8”
Material - 1/4” Hot-rolled, zinc plated carbon steel
Base (DSA10)
Dimensions - 2 1/4” Height x 12” ...
AP - Airport Support System
(2)
Specification:
Dimensions - 2” High x 5” Wide x Length (Base Length)
Material
Base - 100% recycled rubber, UV resistant
Maximum Load - 500 lbs.
Function:
The AP Series is designed to provide support for all electrical and
HVAC equipment. Grooved recessed tray prevents movement and dampens
vibration. Allows water passage; prevents growth of moss and mold.
Lightweight. Consult roofing manufacturer or engineer for ...
CC - Copper Piping Support
Specification:
Base - Recycled rubber with 14 gauge Galvanized combination
channel fitting. (1 5/8” x 1 5/8” strut welded to galvanized steel plate.)
Dimensions: 4” High x 6” Wide x 9.6” Long
Material: 100% recycled rubber, UV resistant
Maximum Load - 350 lbs.
Function: The CC Series is designed for support of copper piping on ...
CP - Platform Series
(3)
Specification:
Dimensions
Base - 2” High x 5” Wide x 36” Length
Platform: 24” Wide x 36” - 72” Length
Material
Base - 100% recycled rubber, UV resistant
Platform: Galvanized steel
Maximum Load - 600 lbs.
Function: The CP Series is designed as a non-penetrating lightweight to bring to level platform surface. ...
Translate This Page
